Description: Abstract for rdsmn.aat
This file contains the centerline of all named and unnamed roads, alleys, gravel, dirt, bike, walking trails and other relevant features in Okaloosa County. If a segment is part of a named, street it will have address ranges attached to each side of the segment and list the official 911 street names. If a segment is not part of a named street it will not have address ranges and not be named, however, it will have the TRANS-TYPE (transportation type or surface type) coded. These arcs are left in the file and are used for display purposes only. Okaloosa County GIS Division divided the County into 4 Phases. Purpose for rdsmn.aat
To enable all addresses within Okaloosa County to be located using address geocoding. This shapefile allows the program to estimate the location of an address based on the length of the segment and the address range assigned to the segment. For example, an address of 49 Main Street would plot in the middle of a Main Street segment with an address range of 1-99 on one side and 2-100 on the other. The figure below illustrates this example of address geocoding.
EMBED Word.Picture.8 Abstract for rdsmn.pat
This file contains points, which represent the location of site addresses in Okaloosa County. These site address points also show their exact location on the surface of the earth. Each point contains address information and their X and Y coordinate in State Plane. In the case of multi-floor structures (such as apartments or condominiums), these areas will have points snapped on top each other. You can distinguish these in a selection set by the FL or floor. Each point also contains the parcel identification number and the mailing address to the parcel. Okaloosa County GIS Division divided the county into 4 phases. Purpose for rdsmn.pat
To enable all addresses within Okaloosa County to be located using a single house with zone address style of geocoding. Features in this file are represented by a single house number and zone zip code. No ranges are used. This will allow for accurate address matching and to the exact location on the surface of the earth. For example, an address of 49 Main Street might be addressed in two locations within Okaloosa County; 49 Main Street, Crestview, 32539 and 49 Main Street, Niceville, 32578. However, because the zone or zip code is different for each address, it will locate the correct address based on the zone.
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterAlong Label Expression: [SHIELD_NUM] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterAlong Label Expression: [SHIELD_NUM] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterAlong Label Expression: [SHIELD_NUM] Use Coded Values: true Symbol:
Color: [255, 170, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 6 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: Abstract for rdsmn.aat
This file contains the centerline of all named and unnamed roads, alleys, gravel, dirt, bike, walking trails and other relevant features in Okaloosa County. If a segment is part of a named, street it will have address ranges attached to each side of the segment and list the official 911 street names. If a segment is not part of a named street it will not have address ranges and not be named, however, it will have the TRANS-TYPE (transportation type or surface type) coded. These arcs are left in the file and are used for display purposes only. Okaloosa County GIS Division divided the County into 4 Phases. Purpose for rdsmn.aat
To enable all addresses within Okaloosa County to be located using address geocoding. This shapefile allows the program to estimate the location of an address based on the length of the segment and the address range assigned to the segment. For example, an address of 49 Main Street would plot in the middle of a Main Street segment with an address range of 1-99 on one side and 2-100 on the other. The figure below illustrates this example of address geocoding.
EMBED Word.Picture.8 Abstract for rdsmn.pat
This file contains points, which represent the location of site addresses in Okaloosa County. These site address points also show their exact location on the surface of the earth. Each point contains address information and their X and Y coordinate in State Plane. In the case of multi-floor structures (such as apartments or condominiums), these areas will have points snapped on top each other. You can distinguish these in a selection set by the FL or floor. Each point also contains the parcel identification number and the mailing address to the parcel. Okaloosa County GIS Division divided the county into 4 phases. Purpose for rdsmn.pat
To enable all addresses within Okaloosa County to be located using a single house with zone address style of geocoding. Features in this file are represented by a single house number and zone zip code. No ranges are used. This will allow for accurate address matching and to the exact location on the surface of the earth. For example, an address of 49 Main Street might be addressed in two locations within Okaloosa County; 49 Main Street, Crestview, 32539 and 49 Main Street, Niceville, 32578. However, because the zone or zip code is different for each address, it will locate the correct address based on the zone.
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterAlong Label Expression: [SHIELD_NUM] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterAlong Label Expression: [SHIELD_NUM] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterAlong Label Expression: [SHIELD_NUM] Use Coded Values: true Symbol:
Color: [255, 170, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 6 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 35 Font Family: Arial Black Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 35 Font Family: Arial Black Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 35 Font Family: Arial Black Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 35 Font Family: Arial Black Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 20 Font Family: Arial Black Font Style: normal Font Weight: normal Font Decoration: none
Description: Description of the Coastal Construction Control Line (CCCL) was established in compliance with Section 161.053 of the Florida Statutes. Said control line lying along the Gulf of Mexico from the easterly boundary of Eglin Air Force Base and the westerly boundary of the Okaloosa Island Authority line easterly to the intersection with the western boundary of Eglin Air Force Base. Recommencing at the easterly boundary of Eglin Air Force Base and continuing easterly to its terminus at the intersection with the Okaloosa-Walton County line.Said Coastal Construction Control Line is related to a series of “permanent reference monuments” (P.R.M.)For monuments established by the Department of Natural Resources, State of Florida, or referred to by station name for monuments established by National Geodetic Survey (N.G.S.), said permanent reference monuments established on the north zone of the State of Florida Plane Coordinate System. All stations in this description are based on North American 1927 Datum.Chapter 62B-33, Florida Administrative Code, provides the design and sighting requirements that must be met to obtain a coastal construction control line permit. Approval or denial of a permit application is based upon a review of the potential impacts to the beach dune system, adjacent properties, native salt resistant vegetation, and marine turtles. This coverage was created by using the recorded survey (OR BOOK 1642 PAGES 1073 THROUGH 1082) performed by the State Topographic Office, Florida Department of Transportation, completed in July 1989.
Description: Individual states spend millions of dollars annually on "economic development" (as direct outlays, loans or deductions from taxes) in hopes of luring new businesses and creating jobs. Every legislative session brings pressure for new incentive programs, sometimes to attract a major development and sometimes to keep up with what neighboring states have done. One of the most popular incentives employed by the states is the enterprise zone. As originally envisioned, an enterprise zone is a specific geographic area targeted for redevelopment on the basis of high Unemployment, poverty, age of housing stock or other evidence of economic weakness. Businesses that move into an enterprise zone to create jobs are eligible for various combinations of regulatory relief and tax abatements, credits, deductions and exemptions. Eligibility may include requirements that companies employ a certain percentage of local residents or people who have been on public assistance. The attractiveness of these programs has led some states to considerably expand eligibility for them well beyond decaying inner cities. This program, which is administered by the Governor’s Office of Tourism, Trade and Economic Development, was created in 1982 to provide incentives in the form of tax credits and refunds to businesses that locate or invest in distressed areas. An enterprise zone is a specific area that is targeted for redevelopment on the basis of high unemployment, poverty, or other evidence of economic weakness.One result of extending enterprise zone benefits throughout a state is to lose the effect of targeting a particular area for development or redevelopment.
Color: [255, 255, 190, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 16 Font Family: Arial Black Font Style: normal Font Weight: normal Font Decoration: none
Description: DATA VERSION: July 2018: This data set updates and replaces all previous versions of the Florida Master Site File historical bridges data layer. This version incorporates newly recorded bridges and updates of previously recorded ones.DATA CURRENCY: Data from the Florida Master Site File are continually updated. This data layer is only current as of the date of this document. Contact the Florida Master Site File for updated data layers.DATA SOURCE: Source data were created by the Division of Historical Resources. The original location data are based on field recording forms and map plots submitted to the Site File. Florida Master Site File site folders contain an historic bridge form with descriptive location data, photographs, and any site plots provided by the bridge recorder.DERIVATION METHODS FOR DATA: This data layer is maintained by on-screen (heads-up) digitizing bridge locations in ESRI ArcMAP. Scanned, georeferenced, 1:24,000 scale USGS quadrangles and ESRI world imagery map services are used as the background reference images.
Copyright Text: FLORIDA DIVISION OF HISTORICAL RESOURCES
Description: Data obtained 2002 from the Florida Division of Historical Resources. The Florida Master Site File is the State of Florida's official inventory of historical cultural resources. Categories of resources recorded at the Site File include archaeological sites, historical structures, historical cemeteries, historical bridges and historic districts. The Site File also maintains copies of archaeological and historical survey reports and other manuscripts relevant to history and historic preservation in Florida. FOR INTERNAL USE ONLY (NOT PUBLIC DATA)Building plans and archaeological site location information are classified as sensitive and are exempted from Florida's open records laws. Users are not to publish, distribute, or post on the internet or otherwise disseminate data which would reveal archaeological site locations. Contact Growth Management or Florida Division of Historical Resources before disseminating this data.
Copyright Text: Florida Division of Historical Resources, Okaloosa County GIS, and Okaloosa County Growth Management.
Description: This data set contains the locations and basic attributes of sites, buildings, objects, structures, and districts individually listed on the National Register of Historic Places (NRHP). *NOTE: Only properties LISTED prior to the date of this dataset are contained in this layer. Properties determined eligible, pending nomination or pending owner objection do not appear in this data set. Information on currently listed properties can be obtained from the National Register web site at http://www.cr.nps.gov/nr/.DATA VERSION: July 2018: This data set updates and replaces all previous versions of the Florida Master Site File National Register of Historic Places listed data layer. This version contains changes to the attribute table. The ‘RESOURCE’ field has been removed because it no longer appears in the downloadable NPS data set on which this attribute table is based. See the list of attribute table fields and descriptions below for more information.DATA CURRENCY: Data from the Florida Master Site File (FMSF) are continually updated. New properties are added to the NRHP on an ongoing basis. This data layer is only current as of the date of this document. Contact the Florida Master Site File or visit the National Register web site at http://www.nps.gov/nr/ for up-to-date information.DERIVATION METHODS FOR DATA: Two methods were used to create the polygons in this dataset. When maps were present in the NR nomination or in the Site File folder for the resource, the polygons were created by on-screen (heads-up) digitizing in ArcMap or ArcInfo. Scanned, georeferenced, 1:24,000 scale USGS quadrangles and ESRI world imagery map services were used as the background reference images. For a few offshore features (such as lighthouses and shipwrecks), georeferenced, 1:80,000 scale NOAA nautical charts were used as background reference images. For a small minority of resources, maps were not available. In these cases, UTM coordinates included in the NR documentation were used to generate the polygons.DATA SOURCE: Source location data were created by the Division of Historical Resources. The boundary data are based on field recording forms, site plots and NHRP registration forms submitted to the Site File. Additional information was gathered from the National Register Information System (NRIS). All attribute data (with the exception of the state site number) is taken directly from the NRIS database. NRIS data can be searched or downloaded from the World Wide Web at http://www.nps.gov/nr/ATTRIBUTE NOTES: With the exception of the SITEID field, NHLDATE field, and GIS location, all attributes are imported, as is, from the NRIS database. Additional information on each resource can be viewed or downloaded directly from the National Register Information System web site or by contacting the FMSF.
Copyright Text: FLORIDA DIVISION OF HISTORICAL RESOURCES
Description: This data set contains cultural resource field survey project boundaries and basic survey attributes as recorded at the Florida Master Site File.DATA VERSION: July 2018: This data set updates and replaces all previous versions of the Florida Master Site Field Surveys data layer. This version incorporates newly recorded surveys and updates of previously recorded ones.DATA CURRENCY: Data from the Florida Master Site File are continually updated. On average, the Site File processes 500 additional survey manuscripts each year. This data layer is only current as of the date of this document. Contact the Florida Master Site File for updated data layers.LIMITATIONS OF THE DATA/WARNINGS TO THE USER: The field survey projects data are based on field reports which have been submitted by many and varied individuals, groups, institutions, and cultural resource firms. Submissions to the Site File are sometimes accepted from amateurs as well as professionals. The survey locations are only as accurate as the location information submitted to the Site File by the author or organization producing the report. The accuracy of submitted information cannot always be verified.Survey projects depicted in this coverage vary widely in intensity, scope and quality. Surveys often document only a particular class of cultural resource, such as bridges only or archaeological sites only. It CANNOT be assumed that because an area has been surveyed, all cultural resources in the area have been identified. This coverage is best used as a spatial index to field surveys reported to the Florida Master Site File.This data layer only represents a subset of all research manuscripts on file at the Florida Master Site File and includes archaeological and architectural field survey projects. Other research manuscripts on file at the Site File (but NOT represented in this dataset) include: archaeological excavation reports, unpublished overviews of groups of cultural resources, documents based only on library or archival research, detailed reports on standing structures, and survey reports prepared by the United States Forest Service for projects carried out on National Forest properties.DATA SOURCES AND DERIVATION METHODS FOR DATA: Source data were created by the Division of Historical Resources. The original survey boundary data are based on manuscripts and project maps submitted to the Site File, which were then hand drawn onto USGS 1:100,000 scale metric topographic maps. These paper maps with survey boundaries marked were hand digitized by an outside contractor using AutoCAD and a digitizing tablet. The four corners (NAD27) of these maps were used to place the reference system tics. The AutoCAD files were converted to Arc/Info files in geographic coordinates and joined into a statewide coverage using the Arc/Info 7.2.1. In September 2003 the base coverages were migrated to ArcGIS personal geodatabases and are maintained in that format. In December 2014 the datum of the base data layer was translated from NAD27 to WGS84 using ArcGIS 10.2.1 and a composite transformation (NAD27 to NAD83 NADCON & NAD83 to WGS84 ITRF00). Additions, updates, and maintenance of this data are performed by Site File staff using on-screen digitizing in ArcGIS. Scanned, georeferenced, 1:24,000 scale and 1:100,000 scale USGS topographic maps and ESRI world imagery map services are used as the background for the on-screen digitizing process.
Copyright Text: FLORIDA DIVISION OF HISTORICAL RESOURCES
Description: This data set contains resource group locations and attributes as recorded at the Florida Master Site File (FMSF). Resource groups are historical districts, archaeological districts or building complexes. Individual resources contributing to the resource group are usually (but are not always) separately listed in the Florida Master Site File.DATA VERSION: July 2018: This data set updates and replaces all previous versions of the Florida Master Site File resource groups GIS data layer.DATA CURRENCY: Data from the Florida Master Site File are continually updated. This data layer is only current as of the date of this document. Contact the Florida Master Site File for updated data layers.DATA SOURCE: Source data were created by the Division of Historical Resources. The original location information is based on field reports, FMSF forms and National Register nomination forms which have been submitted to the Florida Master Site File by many and varied individuals, groups, institutions, and cultural resource firms. Submissions to the Site File are sometimes accepted from amateurs as well as professionals. The accuracy of submitted information cannot always be verified.AUTOMATION METHOD: Resource group boundaries are digitized on-screen in ArcGIS using Scanned, georeferenced, 1:24,000 scale USGS quadrangles and ESRI world imagery services as the base maps.ATTRIBUTE NOTES: Attributes values are derived from the FMSF database. The FMSF database and paper files may contain several forms (an original and updates) for an individual resource group. The attributes in this data layer may be derived from a single form or a composite of several forms.
Copyright Text: FLORIDA DIVISION OF HISTORICAL RESOURCES
Description: This data set contains historic structure locations and attributes as recorded at the Florida Master Site File.DATA VERSION: July 2018: This data set updates and replaces all previous versions of the Florida Master Site File historical structures data layer. This version incorporates newly recorded structures and updates of previously recorded locations and attributes.DATA CURRENCY: Data from the Florida Master Site File are continually updated. On average, the Site File processes over 6,000 additional historic structure forms each year. This data layer is only current as of the date of this document. Contact the Florida Master Site File for updated data layers.DATA SOURCE(S): Source data were created by the Division of Historical Resources. The original location information is based on field reports and address data which have been submitted to the Florida Master Site File by many and varied individuals, groups, institutions, and cultural resource firms. Submissions to the Site File are sometimes accepted from amateurs as well as professionals. The accuracy of submitted information cannot always be verified.DERIVATION METHODS FOR DATA: Structure locations in this data layer were automated using one of three methods; address matching by DHR, on-screen digitizing by DHR, or automated by an external party. The PLOT_MTHD field indicates whether a structure was address matched(M) by the FMSF, digitized(D) by the FMSF, or automated externally(X). Roughly 60% of the structure locations (statewide) were generated by address matching.The address matching was carried out using the geocoding function of ArcView 3.0a. Addresses were matched against the ESRI U.S. Street Database (1997). The line data for the ESRI database (based on Tiger line data) was digitized at a 1:100,000 scale. Due to the small scale and numerous attribute errors in the reference street data, the geocoding process resulted in typical positional errors (as spot-checked against surveyor provided maps) of 20 to 100 meters with occasional larger errors possible. In some cases this results in a structure location point appearing on the wrong side of the street or in the wrong block when displayed against a scanned 1:24,000 USGS quadrangle. It is recommended that the data user compare the locations of the address matched structures to the ESRI U.S. Street Database and other background layers (such as scanned quads) to most accurately interpret locational information.Not all structures and addresses adequately matched the ESRI U.S. Street Database. Structures which did not address match were on-screen digitized in ArcView 3.0a, 3.1 and 3.2 using scanned, georeferenced USGS 1:24,000 quadrangles as a background. Location information for these structures was culled from a variety of sources, including: surveyor-provided maps (the vast majority fall into this category), verbal location descriptions included on the site form, commercially available street atlases, county road maps, county property appraiser databases, city directories, and direct telephone contact with surveyors or property owners. The accuracy of the digitized locations is, in general, somewhat better than that of the address matched structures. However the overall coverage should be considered a 1:100,000 scale data layer.A small number of structure locations in this data set were automated by an outside entity. In general, these locations are deemed by the Site File to be of better quality/accuracy than those address matched by DHR.After the data layers had been completed they were converted from ArcView shapefiles to ArcInfo coverages using the SHAPEARC command in ArcInfo 7.1. In September 2003, the base coverages were converted to an ESRI personal geodatabase format and are currently maintained in geodatabase format. In December 2014 the datum of the base data layer was translated from NAD27 to WGS84 using ArcGIS 10.2.1 and a composite transformation (NAD27 to NAD83 NADCON & NAD83 to WGS84 ITRF00).
Copyright Text: FLORIDA DIVISION OF HISTORICAL RESOURCES
Value: 39 Label: 39 - Dothan Loamy Sand - 2 to 5% slope, well drained permeability rapid in upper part, slow in lower part, run off is slow Description: Symbol:
Value: 45 Label: 45 - Orangeburg Sandy loam - 0 to 2% slopes, well drained permeability is moderately rapid in the upper part moderate in lower parts of the soil. Description: Symbol:
Value: 46 Label: 46 - Orangeburg Sandy loam - 0 to 5% slopes, well drained permeability is moderately rapid in the upper part of the soil Description: Symbol:
Value: 4 Label: 4 - Chipley Foxworth - nearly level and gently sloping, somewhat poorly drained and moderately well drained soils that are sandy throughout Description: Symbol:
Value: 6 Label: 6 - Dorovan - nearly level, very poorly drained soils that are organic - usually in freshwater swamps or drainage ways Description: Symbol:
Value: 10 Label: 10 - Kured Sand - 0 to 8% slopes, excessively drained soils, available water capacity very low, permeability is rapid Description: Symbol:
Value: 12 Label: 12 - Lakeland sand - 0 to 5% slope, excessively drained, permeability is rapid, the available water capacity is very slow, and runoff is slow Description: Symbol:
Value: 13 Label: 13 - Lakeland sand - 5 to 12% slope, excessively drained soils usually leads to drainage ways and around depressions, permeability is rapid, the available water capacity is very slow, runoff is slow Description: Symbol:
Value: 14 Label: 14 - Lakeland sand - 12% to 30% slope, excessively drained soils usually leads to drainage ways and around depressions,\npermeability is rapid, the available water capacity is very slow, runoff is slow Description: Symbol:
Value: 16 Label: 16 - Lucy loamy sand - 0 to 5% slopes well drained permeability rapid in upper part, moderate in lower, run off is slow, dries quickly Description: Symbol:
Value: 17 Label: 17 - Mandarin Sand - 0 to 3% slopes, permeability is very rapid in the surface and subsurface layer. Wetness is a moderate limitation for home sites or businesses Description: Symbol:
Value: 18 Label: 18 - Newhan Coroll complex - areas near dunes of coast, available water capacity, and organic content and natural fertility is low Description: Symbol:
Value: 37 Label: 37 - Bonifay Sand - 5 to 8% slope, well drained, permeability is rapid in the surface and subsurface layer, landfills or septic tanks should have limitations Description: Symbol:
Value: 39 Label: 39 - Dothan Loamy Sand - 2 to 5% slope, well drained permeability rapid in upper part, slow in lower part, run off is slow Description: Symbol:
Value: 40 Label: 40 - Dothan Loamy Sand - 5 to 8% slope, well drained permeability rapid in upper part, slow in lower part, run off is slow Description: Symbol:
Value: 45 Label: 45 - Orangeburg Sandy loam - 0 to 2% slopes, well drained permeability is moderately rapid in the upper part moderate in lower parts of the soil. Description: Symbol:
Value: 46 Label: 46 - Orangeburg Sandy loam - 0 to 5% slopes, well drained permeability is moderately rapid in the upper part of the soil Description: Symbol:
Value: 47 Label: 47 - Orangeburg Sandy loam - 5 to 8% slopes, well drained permeability is moderately rapid in the upper part of the soil. Description: Symbol:
Value: 49 Label: 49 - Bonifay-Dothan-Angie Complex - 5 to 12% slopes, well and moderately well drained, moderately suited for urban development Description: Symbol:
Value: 50 Label: 50 - Yemasse, Garcon and Bigbee soils - poorly drained, occasionally flooded - usually along flood plaints and major streams, slope usually < 2% Description: Symbol:
Color: [230, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [52, 52, 52, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Stencil Font Style: normal Font Weight: normal Font Decoration: none